Cams Camshaft For

Feuling High Flow Chain Drive Bearing Cam Support Plate 99-06 for Harley Twin Ca

Feuling High Flow Chain Drive Bearing Cam Support Plate 99-06 for Harley Twin Ca

Feuling High Flow Chain Drive Bearing Cam Support Plate 99-06 for Harley Twin Ca    Feuling High Flow Chain Drive Bearing Cam Support Plate 99-06 for Harley Twin Ca
HIGH FLOW camplates for TC. Engines increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case increasing engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings resulting in 25-35 degree cooler engine temperatures. Made from 7075 billet aluminum which 50% harder and stronger than the factory, SE. The 7075 increases the strength and hardness of the camplate, holding tighter tolerances under temperature eliminating flexing and the need for bronze bushings as 7075 material has excellent bearing like properties.

Camplates are blue printed and matched to the Feuling. Oil pumps, which allow the Twin Cam. Engine to take full advantage of the increased volume from the high flow oil pumps resulting in cooler quieter engine operation. Tighter cam bearing bore tolerance for improved press fit. Camplates are pressure tested & pressure relief valve and spring are pre-set and designed for the increased volume and pressure, eliminating the need to stretch the spring or use a shim.

When matched with the Feuling. Race Series Oil Pump rear wheel power gains of 3 Horsepower and 4 ft/lbs of Torque are achieved. For use ONLY with the Feuling.

Part # 8010² CAMPLATE Chain Drive TC. 99 - 06, Except 06 Dyna, Includes military spec hard anodize, bearing retainer plate, tensioner pins & chain guide tower, For use ONLY with FEULING. Oil pumps #7000 & 7050 ² Includes tensioner pins and guide hardware. TC 99-06 Except 06 Dyna, Chain Drive, Requires FEULING oil pump #7000 or #7050, Includes Tensioner pins and tensioner guide tower.

Billet 7075, drops engine temps 20-35 degrees cooler than Screamin Eagle or other aftermarket camplates. Before you unwrap your parts double check your fitment and once unwrapped, look the item over before trying to install it.

If you can snap a picture of the damage and notify us ASAP we can replace the order right away. Notify us right away so we start the process.

We're happy to step in and get the ball rolling. An estimated restock date will be provided at the time of cancellation. The item "Feuling High Flow Chain Drive Bearing Cam Support Plate 99-06 for Harley Twin Ca" is in sale since Sunday, March 1, 2015.

This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Engines & Engine Parts\Camshafts". The seller is "easternpc" and is located in Gambrills, Maryland. This item can be shipped worldwide.

  • Brand: Feuling
  • Manufacturer Part Number: 8010
  • Surface Finish: Hard Anodized
  • Warranty: Unspecified Length
  • Country/Region of Manufacture: Unknown
  • Drag Part #: 0925-0109
  • Tucker Part #: 498670

Feuling High Flow Chain Drive Bearing Cam Support Plate 99-06 for Harley Twin Ca    Feuling High Flow Chain Drive Bearing Cam Support Plate 99-06 for Harley Twin Ca