Aftermarket Headers Required: Suggested for maximum performance. Rear Gear Upgrade Required: No. Works Well with Nitrous: Yes, up to 150HP. Will Pass Most Smog Emissions: No. This Tick Performance Elite Series Camshaft Package for LS3/L99 Engines includes the following.Tick Performance TRUCK Stock Converter Camshaft (TPSCC0013TR). 660 Lift Dual Valve Spring Kit w/ Steel Retainers.
7.400" Chromoly One Piece Pushrods, 5/16" diameter, and. 080 wall (set of 16). This Tick Performance TRUCK Stock Converter Camshaft was designed for LS engine owners running rectangle port heads that do not wish to install an aftermarket torque converter. This cam is very unique in this regard, as most (if not all) aftermarket camshafts require some sort of higher stall converter. By keeping the overlap low we have designed a camshaft that can be idled at the stock idle RPM, thus allowing the stock converter to be utilized!
This camshaft will not work in vehicles equipped with VVT or DOD. Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available. Don't see the size pushrod you need?
These are available in anything from 7.000" through 11.550" long in 0.025 increments. 7.400 is the standard LS length, but any of the following can affect pushrod length required and each application may be different. Cam Shaft Base Circle Diameter. We highly recommend that you measure you particular application to determine correct pushrod length due to the number of variables involved. We cannot recommend a length based strictly on combination and the only way to determine required length is to measure appropriately.
NOTE: This camshaft utilizes a 3-bolt timing gear pattern. NOTE: The valve spring kit included is designed for stock style valve guides ONLY. The valve spring kit will not work with aftermarket bronze valve guides.
Please read the listing entirely as r. If you have any questions or are unsure of something, please ask before purchasing. Cancellations will not be made for purchasing errors.Are available for your review by clicking the hyperlink. The item "Tick Performance TRUCK Stock Converter Cam Kit for LY6/L92 Silverado/Sierra" is in sale since Monday, December 31, 2018. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Camshafts, Lifters & Parts". The seller is "glennsautoperformance" and is located in Mount Airy, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
For more information, visit www.P65Warnings.ca.gov WARNING: It is illegal to install any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system unless the part is exempted or has an Executive Order issued by the California Air Resources Board (also commonly referred to as the "EO" number). Confirmation: By completing your purchase, you acknowledge that any NON CARB-approved products will be installed for off-road competition use only. Furthermore, by acknowledging you understand the above notice regarding CARB-approved products, and accept responsibility for compliance.