Brian Tooley Racing Nitrous Camshaft Kit for 1997+ Chevrolet 400+ CI LS Engine

  

BTR Camshaft Install Kit includes. 660 Lift BTR Platinum Spring Kit with Steel Retainers. LS Chromoly 7.400 Long 5/16 Diameter Pushrods. This camshaft is the result of years of back to back testing on 400+ cubic inch engines, mostly using TFS cathedral port heads and Mast intake.

The intake lobe made 15 rwhp more than the same exact duration Comp LSL intake lobe, and also made as much power as a Comp intake lobe with around. It made more power in back to back testing compared to a cam from another leading cam company as well.

So to say that this cam has been rung out, is an understatement. This cam generally runs in the 5.30's-5.50's in the 1/8 mile in a 3000+ lb chassis and has run as fast as 5.10'-5.20's using the same TFS 245 heads and Mast intake. Since this cam utilizes ultra stable lobes, it will turn 7500 rpm with our Platinum. 685" lift springs (SP010-16) springs shimmed to 1.700" it can turn 8000 rpm. Good lifters should be used like the Comp or Johnson short travel and stock rockers. Roller rockers will NOT turn as much RPM as the stock rockers will. 595 isn't enough lift for a nitrous cam, but back to back testing has shown otherwise, with increased exhaust lift showing no gains in power. This cam has gained 400 rwhp on a 300 shot of nitrous utilizing TFS 245 heads with the N2O exhaust port. The item "Brian Tooley Racing Nitrous Camshaft Kit for 1997+ Chevrolet 400+ CI LS Engine" is in sale since Thursday, October 24, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Camshafts, Lifters & Parts". The seller is "amsracing" and is located in Bossier City, Louisiana. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Restricted States: California
• Camshaft: 35166124
• Valve Spring Kit: SK001/S/0560/BB
• Lifter Type: Hydraulic Roller
• Interchange Part Number: LSX
• California Prop 65 Warning: WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects or, other reproductive harm. For more information, visit www.P65Warnings.ca.gov WARNING: It is illegal to install any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system unless the part is exempted or has an Executive Order issued by the California Air Resources Board (also commonly referred to as the "EO" number).  Confirmation: By completing your purchase, you acknowledge that any NON CARB-approved products will be installed for off-road competition use only.
  Furthermore, by acknowledging you understand the above notice regarding CARB-approved products, and accept responsibility for compliance.
• Manufacturer Part Number: 35166124
• Brand: Brian Tooley Racing
• Fitment Type: Performance/Custom
• Warranty: Unspecified Length