MACE PERFORMANCE CAMSHAFTS FOR SAAB ALLOYTEC B284L B284R A28NET LAU 2.8L V6. If you think you've gone as far as you can with bolt-on performance parts or are even rebuilding your late model V6, it's time to consider the benefits of our eagerly anticipated high-performance camshafts.
The Alloytec Mace cams areunmatched in quality and value compared to any other V6 engine modification. Providing gains of around 30rwkw with a proper dyno tune and a substantial torque increase across the entire rpm range, these cams unleash the full potential of the high feature V6. These cams provide power gains of approximately 30rwkw between 1500 and 6000rpm on a naturally aspirated V6 with a cold air intake and full exhaust system. Despite the excellent performance characteristics of this grind, the engine remains tractable and responsive at low speed. Our billet cams even provide that choppy idle and the heart-throbbing symphony at wide open throttle that every enthusiast loves to hear.These cams have been designed to work in conjunction with the factory valve-train and engine components, so you are not required to replace a thing. If you intend on revving your vehicle beyond the factory rev-limiter or adding a little boost, then we'd at least recommend our high-performance valve-spring kit and aftermarket timing chain set.
These performance camshaft are specifically designed to suit Saab vehicles fitted with Alloytec B284L, B284R, A28NET and LAU Turbo V6 engines. This VZ Commodore equipped with an Alloytec LE0 3.6L V6 made an impressive 396HP or 294kW at the rear wheels through a stock auto with a set of Mace Cams and a Raptor Supercharger Kit. Thats a power increase of 160%! This is a fantastic result and illustrates these cams work well in a boosted application as well as a naturally aspirated setup.
The dynamometer result was achieved through the use of a Mainline, which generally read lower than their counterparts. These camshafts are brand new, so there is no need for change-over or deposit. In addition, this grind is compatible with all makes and models that are equipped with the high feature V6. Unfortunately, these aftermarket camshafts do not have provisions for the cam locking tools.
Please use the timing marks on the gears and chains to align the cams. Please remember to check out our other performance products for sale. At Mace Engineering Group, we take great care in packaging of your products appropriately to ensure that they arrive in perfect condition.
We will then provide you with a replacement product as soon as possible. After appropriate testing, if it is found that the defect is due to misuse, willful damage, unauthorized repair or tampering with the product by the customer, return will not be accepted by Mace Engineering Group.
Orders are neither dispatched nor delivered on weekends. Orders outside of Australia may take up to 10 days. Customer must return the defective item(s) first, with a full description of the problem. Appropriate tests will be conducted to determine the authenticity of the defects and claims. Once, Mace Engineering Group is satisfied, identical items(s) will be sent out to the customer.
Please ensure proper packaging of the product to prevent any damage while in transit, as goods are at owner's risk. Cold Air Intakes / Insulators. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Valvetrain Components\Camshafts". The seller is "mace_engineering_group" and is located in this country: AU. This item can be shipped worldwide.