Cams Camshaft For

Mace Stage 2 Cam And Chip Package For Holden Commodore Vr Vs 304 Mpfi 5.0l V8

Mace Stage 2 Cam And Chip Package For Holden Commodore Vr Vs 304 Mpfi 5.0l V8

Mace Stage 2 Cam And Chip Package For Holden Commodore Vr Vs 304 Mpfi 5.0l V8    Mace Stage 2 Cam And Chip Package For Holden Commodore Vr Vs 304 Mpfi 5.0l V8

MACE STAGE 2 CAM AND CHIP PACKAGE FOR HOLDEN COMMODORE VR VS 304 MPFI 5.0L V8. We have formed a series of high-performance camshaft and memcal packages for your VN - VS. Designed to deliver real-world horsepower gains of up to 35%, our cams are intended to wake your 304 right up and put the enjoyment back into driving. Stage 2 Kit: Improved mid-range power. We recommend this kit be used in conjunction with at least a 2.5 twin cat exhaust for maximum performance.

This package provides a maximum power gain of 20% between 1500 and 6000rpm. This increase has been achieved without sacrificing any noticeable low-end torque or drivability. This kit can also be ADR compliant. 01 X High performance camshaft.

01 X Tailor made memcal. 16 X Crow Cams iron lifter. 16 X Crow Cams performance valve spring. Please select the part number you require by utilizing our fitment guide and parts guide. Memcals in these packages are calibrated by Mace and we have strict guidelines in terms of what modifications our memcals support.

Your setup's compatibility will be determined on the basis of the filled out application form. In case of non-compatibility, you can either change your setup to a compatible one or we can supply you with the package without the memcal.

Our memcals will not be compatible with stroker kits or forced induction. For these cases it is recommended that the vehicle gets a custom dyno tune to ensure it is safe. Genuine broadcast memcal number (4 letter code on sticker attached to factory fitted memcal) will be required in most cases to confirm the operating system. Pushrod length will require checking if heads have been skimmed or block has been decked. We recommend dialing in all aftermarket cams using a degree wheel to ensure that they're phased correctly with the crankshaft.

You can do this by using our 8" or 11" degree wheel listed in other ads. The images are for illustrative purposes only. Please remember to check out our other performance products for sale. At Mace Engineering Group, we take great care in packaging of your products appropriately to ensure that they arrive in perfect condition. We will then provide you with a replacement product as soon as possible.

After appropriate testing, if it is found that the defect is due to misuse, willful damage, unauthorized repair or tampering with the product by the customer, return will not be accepted by Mace Engineering Group. Orders are neither dispatched nor delivered on weekends. Orders outside of Australia may take up to 10 days. Customer must return the defective item(s) first, with a full description of the problem.

Appropriate tests will be conducted to determine the authenticity of the defects and claims. Once, Mace Engineering Group is satisfied, identical items(s) will be sent out to the customer. Please ensure proper packaging of the product to prevent any damage while in transit, as goods are at owner's risk. Cold Air Intakes / Insulators. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Valvetrain Components\Camshafts".

The seller is "mace_engineering_group" and is located in this country: AU. This item can be shipped worldwide.

  • Type: Camshaft
  • Manufacturer Part Number: CCP825-D, CCP826-D, CCP827-D, CCP828-D, CCP829-D
  • Brand: MACE


Mace Stage 2 Cam And Chip Package For Holden Commodore Vr Vs 304 Mpfi 5.0l V8    Mace Stage 2 Cam And Chip Package For Holden Commodore Vr Vs 304 Mpfi 5.0l V8